Ducati Billet Aluminum

Made of Heat Treated, Aircraft Grade Billet Aluminum [6061-T6] – Manufactured using 100% CNC Machining / Finished with Anodize Coating – Lower, Raise, or Maintain your Kickstand Length [pick from 11.5″ inches (292mm) or 12.25″ inches (311mm)] – Reuses the stock pivot bolt and return spring – This listing comes with: (1) Kickstand (1) Stainless Steel Spring Holder (2) Grub Screws (1) Instructions. Hypermotard 796 (all series). Hypermotard 1100 / 1100S (all series). Hypermotard 1100 EVO (all series). Hypermotard 1100 EVO SP (all series). Multistrada 1000 / 1000S (all series). Multistrada 1100 / 1100S (all series). All Multistrada 1000 / 1000S requires modification. During checkout, please note your color choice and length. [Choose from Silver, Red, Gold, Blue, or Black & Choose from 11.5″ (292mm) or 12.25″ (311mm)]. What are the advantages of the SSR Billet Kickstand? Simple, so that your Ducati doesn’t lean over like the Tower of Pisa on its kickstand. We have an aftermarket kickstand on every one of our Ducati, either because the bike leaned over too much on the stock kickstand from the factory or because we decided to raise the back end of the bike to quicken steering. What is the danger of the bike leaning over too much? First, the more the bike leans over, the more weight is on the kickstand. This is dangerous when parking on tarmac because the kickstand can punch through the surface. With a longer kickstand, less weight is applied to the kickstand and it is less likely to punch through softer surfaces. Second, it takes a lot more effort to straighten up a bike that leans heavily. Riders have pulled muscles and strained themselves trying to muscle bikes off the kickstand. Are there any downsides to this kickstand? The only possible downside would be if the bike sits too upright thus increasing the chance of a tip over. By raising rear ride height slightly (does not affect suspension), this problem is eliminated. Manufactured using 100% CNC Machining. The item “SSR Ducati Hypermotard/Multistrada Side Stand Kickstand CNC Billet Aluminum” is in sale since Thursday, April 16, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Bodywork & Frame\Side Stands”. The seller is “ssr_mfg” and is located in San Jose, California. This item can be shipped worldwide.

• Warranty: Yes
• Brand: Slingshot Racing
• Material: CNC Billet Aluminum
• Manufacturer Part Number: Does Not Apply
• UPC: 780305575921
• Product Type: Kickstand

Made of Heat Treated, Aircraft Grade Billet Aluminum [6061-T6] – Manufactured using 100% CNC Machining / Finished with Anodize Coating – Lower, Raise, or Maintain your Kickstand Length [pick from 11.5″ inches (292mm) or 12.25″ inches (311mm)] – Reuses the stock pivot bolt and return spring – This listing comes with: (1) Kickstand (1) Stainless Steel Spring Holder (2) Grub Screws (1) Instructions. Hypermotard 796 (all series). Hypermotard 1100 / 1100S (all series). Hypermotard 1100 EVO (all series). Hypermotard 1100 EVO SP (all series). Multistrada 1000 / 1000S (all series). Multistrada 1100 / 1100S (all series). All Multistrada 1000 / 1000S requires modification. During checkout, please note your color choice and length. [Choose from Silver, Red, Gold, Blue, or Black & Choose from 11.5″ (292mm) or 12.25″ (311mm)]. What are the advantages of the SSR Billet Kickstand? Simple, so that your Ducati doesn’t lean over like the Tower of Pisa on its kickstand. We have an aftermarket kickstand on every one of our Ducati, either because the bike leaned over too much on the stock kickstand from the factory or because we decided to raise the back end of the bike to quicken steering. What is the danger of the bike leaning over too much? First, the more the bike leans over, the more weight is on the kickstand. This is dangerous when parking on tarmac because the kickstand can punch through the surface. With a longer kickstand, less weight is applied to the kickstand and it is less likely to punch through softer surfaces. Second, it takes a lot more effort to straighten up a bike that leans heavily. Riders have pulled muscles and strained themselves trying to muscle bikes off the kickstand. Are there any downsides to this kickstand? The only possible downside would be if the bike sits too upright thus increasing the chance of a tip over. By raising rear ride height slightly (does not affect suspension), this problem is eliminated. Manufactured using 100% CNC Machining. The item “SSR Ducati Hypermotard/Multistrada Side Stand Kickstand CNC Billet Aluminum” is in sale since Thursday, April 16, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Bodywork & Frame\Side Stands”. The seller is “ssr_mfg” and is located in San Jose, California. This item can be shipped worldwide.

• Warranty: Yes
• Unit Type: Kickstand
• Brand: Slingshot Racing
• Material: CNC Billet Aluminum
• Manufacturer Part Number: Does Not Apply
• UPC: 780305575921

Made of Heat Treated, Aircraft Grade Billet Aluminum [6061-T6] – Manufactured using 100% CNC Machining / Finished with Anodize Coating – Lower, Raise, or Maintain your Kickstand Length [pick from 11.5″ inches (292mm) or 12.25″ inches (311mm)] – Reuses the stock pivot bolt and return spring – This listing comes with: (1) Kickstand (1) Stainless Steel Spring Holder (2) Grub Screws (1) Instructions. Hypermotard 796 (all series). Hypermotard 1100 / 1100S (all series). Hypermotard 1100 EVO (all series). Hypermotard 1100 EVO SP (all series). Multistrada 1000 / 1000S (all series). Multistrada 1100 / 1100S (all series). All Multistrada 1000 / 1000S requires modification. During checkout, please note your color choice and length. [Choose from Silver, Red, Gold, Blue, or Black & Choose from 11.5″ (292mm) or 12.25″ (311mm)]. What are the advantages of the SSR Billet Kickstand? Simple, so that your Ducati doesn’t lean over like the Tower of Pisa on its kickstand. We have an aftermarket kickstand on every one of our Ducati, either because the bike leaned over too much on the stock kickstand from the factory or because we decided to raise the back end of the bike to quicken steering. What is the danger of the bike leaning over too much? First, the more the bike leans over, the more weight is on the kickstand. This is dangerous when parking on tarmac because the kickstand can punch through the surface. With a longer kickstand, less weight is applied to the kickstand and it is less likely to punch through softer surfaces. Second, it takes a lot more effort to straighten up a bike that leans heavily. Riders have pulled muscles and strained themselves trying to muscle bikes off the kickstand. Are there any downsides to this kickstand? The only possible downside would be if the bike sits too upright thus increasing the chance of a tip over. By raising rear ride height slightly (does not affect suspension), this problem is eliminated. Manufactured using 100% CNC Machining. The item “SSR Ducati Hypermotard/Multistrada Side Stand Kickstand CNC Billet Aluminum” is in sale since Wednesday, August 5, 2015. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Side Stands”. The seller is “ssr_mfg” and is located in San Jose, California. This item can be shipped worldwide.

• Manufacturer Part Number: Does Not Apply
• Material: CNC Billet Aluminum
• Type: Kickstand
• Brand: Slingshot Racing
• Warranty: Yes