Ducati Billet Aluminum

MUST BE 108mm (4.25) OR THESE WILL NOT FIT!!!! PROUDLY MADE IN THE USA!! RADIAL BRAKE CALIPER MOUNTING BRACKET COMBO. (APPLIES TO ALL 50 USA STATES). NHRA IHRA XDA MANCUP APPROVED!!! THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND…. YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT “SITUATION” THAT NEEDS SOME ATTENTION. THESE STRAPS ELIMINATE WHEELIES FOR LOWER 60′ AND QUICKER E. THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE “HAMMER” EFFECT WHICH OCCURS WHEN LAUNCHING HARD. 1 PRESS RELEASE CAM BUCKLE. PRE DRILLED BOLT PLATES AT THE ENDS. 4.5′ OVERALL LENGTH. RADIAL BRAKE CALIPER MOUNTING BRACKETS SPECS. This is a fast easy way to lower your bike on the street or at the track to provide for more level ride height. At the track these are used to adjust the front end height to control weight transfer during launching. These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps. CNC Machined from lightweight aerospace 6061 Billet Aluminum and provided with stainless steel corrosion free hardware. DON’T SETTLE FOR SECOND BEST. OUR STRAPS ARE 20% STRONGER THAN ANY OTHER AVAILABLE ON THE MARKET! Begin by removing top and bottom brake caliper mounting bolts. Re-insert the bolts through the Radial Mount Strap Brackets with the notched area facing toward the brake caliper. Torque bolts to 29 FT/LBS and repeat on the opposite side. Always route strap UNDER any cables and wires to prevent pinching or damage. Do not allow strap to twist. Route strap upward over steering neck, and down the other side. Attach the remaining end of strap and Tighten strap slightly to remove slack. Torque bolts on both sides to 28 FT/LBS. WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. To find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them. THIS LISTING IS FOR A BLACK STRAP & BRACKETS!!!! THANK YOU FOR LOOKING AND WE HOPE TO HAVE YOU AS ANOTHER SATISFIED CUSTOMER. By purchasing this item you are accepting these terms. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Lowering Kits”. The seller is “speed-needs” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

• Brand: Speed-Needs Performance
• Non-Domestic Product: No
• Type: Radial Brake Caliper Brackets, Tie-down Straps
• Warranty: No
• Bundle Description: Strap w/ 108mm Caliper Brackets
• Custom Bundle: Yes
• Manufacturer Part Number: BPP-RMFELK
• Surface Finish: Black Nylon Billet Aluminum
• Country/Region of Manufacture: United States
• Modified Item: No
• Placement on Vehicle: Left, Front, Rear